# Octopus Tilt Sensor(EF04001) 

## Introduction


 The Tilt sensor is to measure the  levelness of the object based on the tilt switch.
 ![](./images/PkfGPNo.jpg)


## Products Link

[ELECFREAKS Octopus Tilt Sensor](https://shop.elecfreaks.com/products/elecfreaks-octopus-tilt-sensor?_pos=1&_sid=dd780cd1a&_ss=r)

## Characteristics



 The 3-pins ports is easy to plug and play.
 It can work with micro:bit in 3V. 

## Specifications


Item | Parameter 
:-: | :-: 
SKU|EF04001
Working Voltage|DC 3.0V
Power Input|3v-5v
Connector Type|Digital
Pins Definition|1-Signal 2-VCC 3-GND
Response|Quick to response with high sensitivity
Circuit|Simple
Stability|Stable and durable

## Outlook and Dimensions

 ![](./images/MOM6IH7.jpg)

## Quick to Start

### Connection diagram
 Connect to P1 port as the picture shows.

Take sensor:bit for example

 ![](./images/z0jNU2D.png)



Program as the picture shows

 Set the P1 port to a higher level to initialize the module.
 If the detected value is 0 and the the digital read pins is 0, the icon is shown on the screen.
 Or it shows a box.

 ![](./images/tVmLSAJ.png)

### Reference

Links:https://makecode.microbit.org/_WMwRtRXFe2tw

You can also download it directly below:

<div style="position:relative;height:0;padding-bottom:70%;overflow:hidden;"><iframe style="position:absolute;top:0;left:0;width:100%;height:100%;" src="https://makecode.microbit.org/#pub:_WMwRtRXFe2tw" frameborder="0" sandbox="allow-popups allow-forms allow-scripts allow-same-origin"></iframe></div>  


### Result
 When the tilt angel is changed,  the icon or rectangle is shown on the micro:bit.

## Relevant Cases 


## Technique Files