# Case 05: The Calendar ## Introduction The calendar is a publication for daily use, recording dates and other relevant information. The creative combination of calendar and pen holder is not only practical but also saves space on the desktop.![](./images/tooca-laser-1-case-05-01.png) ## Materials Required [TOOCA laser 1](https://shop.elecfreaks.com/products/elecfreaks-tooca-laser-1?_pos=1&_sid=d04f6dda2&_ss=r) 3mm Plywood ## Relevant parameters |Model|TOOCA Laser 1| |:-------:|:-------:| |Material of consumables|Basswood board| |Thickness|2.8mm| |Power|100%| |Speed|240mm/min| |Times required to be engraved/cut|3| Note: This case takes a 2.8mm basswood board as an example. If you need to use different thicknesses or use different materials, please modify the drawing by yourself and refer to the `Recommended parameter` modify the parameters of the software. ## Drawings download link [Calendar.dxf](https://github.com/elecfreaks/learn-en/raw/master/tooca-laser-1/file/calendar.dxf.zip) ## Effect Show ![](./images/tooca-laser-1-case-05-01.png) ![](./images/tooca-laser-1-case-05-02.png) ## material data More detail about the material:[laser cutting material](https://elecfreaks.com/download/tooca-laser/Cutting.zip),[Laser engraving material](https://elecfreaks.com/download/tooca-laser/engraving.zip) Welcome to join the [Laser Engraving Cutter Creative Sharing Community](https://www.facebook.com/groups/1152321032019436/) to share your creativity.