2 Layer 20cm*20cm max - 5/10pcs

This service provides more PCB dimensions(include 5cm x 15cm,5cm x 20cm,10cm x 15cm,10cm x 20cm,15cm x 15cm,15cm x 20cm,20cm x 20cm ) for you. And you can select 5pcs or 10 pcs PCBs. If your PCB have smaller size such as 5cmX5cm or 10 cm X10cm another more cheap service ' 2 Layer 10cm*10cm max -10pcs' may suitable for you. The ' 2 Layer 20cm*20cm max-50pcs' service will provide you 50pcs PCBs.Please check the price for different service and find the most economic one.

Fusion PCB Order Steps：

1. Purchase fusion PCB Service from online store and check out.
2. An order number will be provided in confirmation email from ElecFreaks services (services@elecfreaks.com)
3. Send the gerber file to pcb@elecfreaks.com. The gerber files must be packed into a zip or rar file and named Order(your order number)_(PCB size). For example: Order100_10x10.rar.
4. If the file and design meets requirements, they will be processed and shipped in 4-6 days. If the files have any issue pcb@elecfreaks.com will contact with you.

Gerber file requirement:(The following layers are needed)

Top layer:	pcbname.GTL
Bottom layer:	pcbname.GBL
Solder Stop Mask top:	pcbname.GTS
Solder Stop Mask Bottom:	pcbname.GBS
Silk Top:	pcbname.GTO
Silk Bottom:	pcbname.GBO
NC Drill:	pcbname.TXT

Note:

• Board outline must be included at least in one layer.
• The Gerber file must be RS-274x format.

PCB design tips：

• SINGLE DESIGN, NO PANELIZING
• Your Gerber file must include only one design
• Drills line and long slot can't be accepted
• Minimum slot 1mm*1mm
• DRC compatible as rule file attached
• The PCB size is smallest rectangle that can accommodate PC

Fusion PCB capabilities:

Multi Layers	1－2
PCB Material	FR-4
Available Color	Green, Red+$10, Yellow+10$, Blue+$10, White+$10
Silk Screen	White, Black (For White Solder Mask only)
Maximum Size	20cm X 20cm
Minimum Qty	5pcs or 10pcs optional
Board Thickness	0.8mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm+$48
Thickness Tolerance (t≥0.8mm)	± 10%
Thickness Tolerance (t<0.8mm)	± 10%
Insulation Layer Thickness	0.075mm--5.00mm
Minimum Line	6mil (Recommend >8mil)
Minimum Space	6mil  (Recommend >8mil)
Out Layer Copper Thickness	1oz(35um)
Inner Layer Copper Thickness	17um—100um
Drilling Hole (Mechanical)	0.3mm—6.35mm
Finish Hole (Mechanical)	0.3mm—6.30mm
Diameter Tolerance (Mechanical)	0.08mm
Registration (Mechanical)	0.09mm
Aspect Ratio	8:1
Solder Mask Type	Photosensitive ink
SMT min Solder Mask Width	0.1mm
Min Solder Mask Clearance	0.1mm
Plug Hole Diameter	0.25—0.60mm
Surface Finish	HASL, HASL (Lead Free) +$5, ENIG+$10.

E-TEST:

50% e-test, 100% e-test +$10
50% e-test (Tested PCB will have a mark on the PCB edge). 
100% e-test optional for extra 10$

Down load file:

• Eagle Design Rule
• Eagle CAM file