Your cart is empty

4 Layer 10cm*10cm max -10pcs

Starting at: $99.00
  • Model: PCB110820
  • Shipping Weight: 140g
  • 4567840 Units in Stock

Please Choose:

Surface Finish



Fusion PCB Order Steps:

  1. Purchase fusion PCB Service from online store and check out.
  2. An order number will be provided in confirmation email from ElecFreaks services (
  3. Send the gerber file to The gerber files must be packed into a zip or rar file and named Order(your order number)_(PCB size). For example: Order100_10x10.rar.
  4. If the file and design meets requirements, they will be processed and shipped in 4-6 days. If the files have any issue will contact with you.

Gerber file requirement:(The following layers are needed)

Top layer: pcbname.GTL
Bottom layer: pcbname.GBL
Solder Stop Mask top: pcbname.GTS
Solder Stop Mask Bottom: pcbname.GBS
Silk Top: pcbname.GTO
Silk Bottom: pcbname.GBO
NC Drill: pcbname.TXT


    • Board outline must be included at least in one layer.
    • The Gerber file must be RS-274x format.

PCB design tips

    • Your Gerber file must include only one design
    • Drills line and long slot can't be accepted
    • Minimum slot 1mm*1mm
    • DRC compatible as rule file attached
    • The PCB size is smallest rectangle that can accommodate PC

Fusion PCB capabilities:

Multi Layers 1-2  
PCB Material  FR-4
Available Color Green, Red+$10, Yellow+10$, Blue+$10, White+$10
Silk Screen  White, Black (For White Solder Mask only)
Maximum Size 10cm X 10cm
Minimum Qty 10pcs
Board Thickness 0.8mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm+$48
Thickness Tolerance (t≥0.8mm) ± 10%
Thickness Tolerance (t<0.8mm) ± 10%
Insulation Layer Thickness  0.075mm--5.00mm
Minimum Line  6mil (Recommend >8mil)
Minimum Space  6mil  (Recommend >8mil)
Out Layer Copper Thickness  1oz(35um)
Inner Layer Copper Thickness  17um—100um
Drilling Hole (Mechanical) 0.3mm—6.35mm
Finish Hole (Mechanical)  0.3mm—6.30mm
Diameter Tolerance (Mechanical) 0.08mm
Registration (Mechanical) 0.09mm
Aspect Ratio 8:1
Solder Mask Type  Photosensitive ink
SMT min Solder Mask Width 0.1mm
Min Solder Mask Clearance 0.1mm
Plug Hole Diameter  0.25—0.60mm
Surface Finish HASL, HASL (Lead Free) +$5, ENIG+$10.


50% e-test, 100% e-test +$10
50% e-test (Tested PCB will have a mark on the PCB edge). 
100% e-test optional for extra 10$

Down load file:

This product was added to our catalog on Friday 21 December, 2012.