Posts Tagged "recommend"

New Product Post13

SHD_IOE01_1

  Freaduino Sensor Shield V1.0 (with XBee Shield) [$18]: Freaduino Sensor Shield V1.0 is a IO expansion board. It full compatible with Sensor Shield V4.0 and it is a enhancement version. You can control servo or all kinds of sensors through XBee or our BTbee. And external power supply for servo…

Read More →

New Product Post12

new1

This weekend, we have many new stuff in stock. We will gradually introduce  to you. We add Robot in the left column of store, this will be a series of updates. Here we will provide you all kinds of robotic parts. Our goal is you will be able to build or…

Read More →

New Product Post10

Wireless_GPS_UP501

Hi ElecFreaks Reader, thanks for your attention again, and this week we also provide to your some basic components and breakout. They are often used in the various design.  Let’s take a look. Fastrax UP501 GPS with Antenna Module(UART) [$45]:  Fastrax UP501 GPS receiver module with embedded GPS antenna enables…

Read More →

New Product Post09

BT_Shield

  Bluetooth Shield v1.0 [$17.9]: Bluetooth Shield a serial port Bluetooth module (Master/Slave) breakout board. You can choose ARDUINO’s Digital PIN D0->D7 as Software UART to communicate with Bluetooth Shield(and D0,D1 also is Hardware UART).   Arduino XBee/Bluetooth Bee USB Adapter [$9.9] : Bee Adapter V1.0 is a compact USB…

Read More →

New Product Post08

wireless_BTH_04-LRG

Bluetooth Modem – Minimum pass-through module [$16]:  The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to…

Read More →

New Product Post07

Wireless_FM_TEA

LCD TFT01 Arduino Mega Shield v1.0 [$7.5]: The TFT01 LCD module is work in 3.3V voltage level and it’s not compatible with Arduino MEGA pins , so we make a shield for Arduino MEGA. Now user can directly plug the TFT01 in the shield and stand on the Arduino MEGA…

Read More →

New Product Post06

Resistance-K02-1

  3296 trimpot – trimmable potentiometer Kit [$8.5]: This is 3296 trimpot – trimmable potentiometer Kit, include 15 kinds of potentiometer of each of one. 101(100Ω) x 1pcs ,102(1kΩ) x 1pcs ,103(10kΩ) x 1pcs,104(100kΩ) x 1pcs ,105(1MΩ) x 1pcs ,201(200Ω) x 1pcs,202(2kΩ) x 1pcs ,203(20kΩ) x 1pcs,204(200kΩ) x 1pcs ,205(2M)…

Read More →

New Product Post04

Crystal_osc_01

This week we will recommend some basic components, they are often used in your variety of designs. They are very useful stuff, let’s have a look. XBee Shield with Logic Level Converter :   It’s really cool stuff and compatible with bluetooth bee. There is cc1101 1.27mm interface, which support for logic level conversion. With jumper header selection, it can be…

Read More →

New Product Post03

wireless_BTBee05_02

This week we would like to recommend some usefull stuff to you, let’s see them together…   Bluetooth Bee :  it’s easy to use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup. Support Bluetooth V2.0, the AT command to modify the baud rate, device…

Read More →

New Product Post01

LCD_Nokia5110_11

Hi Guys, from now on we will recommend  some new products to you every week.  We think this is very important and will always go on continuously. Nokia 5110 LCM Black on Blue, it is a  84*48 pixels matrix LCD . Black text on Blue background. Nokia 5110 LCD is…

Read More →
Go To Top ↑

Powered by ElecFreaks