ALL

We made a weightlifting robot this time. When the robot hears us applauding, it will lift the barbell on its chest with force, then hold it for three seconds with a smile and then put it down. If our applause keeps on coming, then the weightlifting robot will make a continuous movement to lift the barbell and be very happy, it even comes with an encouraging sound effect, which is great!

Let's combine micro:bit board, an unused Android phone, and ELECFREAKS micro:bit Nezha 48 IN 1 Inventor's Kit to create a car that can be remotely controlled via WiFi and observe the car's surroundings in real-time via the camera. In this case, we will use two applications, the eWeLink APP and the eWeLink camera APP.

The I2C integrated circuit bus, a serial communication bus using a multi-master-slave architecture, was developed by Philips in the 1980s to allow motherboards and embedded systems to connect low-speed peripherals.

The correct pronunciation is "I square C" or "I square C", while "I two C" is the wrong pronunciation.

PIO is a special peripheral of RP2040, let's learn more about it today because there are more contents of PIO, so this issue has more contents.

Today we introduce the last of the three brothers of communication, SPI.

In the last -term we have used ADCs and internal temperature sensors to read pin voltages and on-chip temperatures to implement the process of converting analog signals into digital signals. By now, having learned to use PWM and ADC, these set the stage for our Pico:ed to work in different situations.

Pulse-Width Modulation, or PWM for short, is a scheme that uses digital signals to simulate changes in analog signals, as most of the signals in our natural life are analog, such as brightness, speed, volume, etc.

Based on the hardware in the previous section, some of you will ask exactly how the LED lighting is achieved.

The answer is to use a GPIO peripheral.

Here you need to understand a concept, the full name of peripherals is external devices.

In the early days, UART, LCD controller, and so on, and the CPU is not on a chip, so that is called external devices.

Warmly celebrate the cooperation between us. We hope ALLNET's Maker Store can do better and better, and make greater contributions to the global steam education industry!

Pico:ed is powered by the latest MCU release from the Raspberry Pi Foundation (RP2040), the first microcontroller for the Raspberry Pi. It brings our signature value of high performance, low cost and ease of use to the microcontroller space.