ELECFREAKS Pico:ed V2

DESCRIPTION

ELECFREAKS Pico:ed V2 is a development board based on Raspberry Pi RP2040 MCU. It uses a dual-core Arm Cortex-M0+ processor with 264KB RAM. The front of the board contains two buttons and a 7x17 dot matrix screen, which can be conveniently used for classroom teaching. 

FEATURES

1. RP2040: Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264kB internal RAM and support for up to 16MB of off-chip flash.

2. USB & Battery Connector

3. Power status LED and USB data transfer LED.

4. 7*17 Dot-matrix Screen

5. Bootsel & Reset Button.

6. 25-pin notched edge connector.

7. Onboard Buzzer.

8. Compatible With Most micro:bit Accessories

9. Exquisite design

10. 2 x Programmable Buttons

11. You can use MicroBlocks for graphical programming.

DISPLAY

7*17 LED fully programmable display. Can display text, numbers, and images.

INPUT BUTTONS & LOGO INDICATOR

Two Programmable buttons and Logo LED.

BOOTSEL & RESET

Burn in firmware and reset RP2040.

EDGE CONNECTOR

Wavy edge connector to connect to devices without soldering.

RP2040

Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264kB internal RAM and support for up to 16MB of off-chip flash.

BUZZER

A sounder for playing beeps and tones.

BUCK TOPOLOGY

The existence of the Buck Chip and the inductor stabilizes the voltage at 3.6V. And reduce the voltage to 3.3V through a Schottky Diode.

MICRO BLOCKS PROGRAMMING

Code in Micro blocks, and python with a range of free-to-use editors.

WHY CHOOSE Pico:ed？

What makes us different from others.

PINS DIAGRAM

SPECIFICATIONS

PACKING LIST

LEARN

Pico:ed