cart
item - $0.00

You have no items in your shopping cart.

Subtotal
$0.00

Grid  List 

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  1. CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN transceiver to give your Arduino/Seeeduino CAN-BUS capability. With an OBD-II converter cable added on and the OBD-II library imported, you are ready to build an onboard diagnostic device or data logger. Learn More
  2. Special Price $1.99

    Regular Price: $8.54

    IBridge lite is a 3X3 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino, you can plug it on Arduino board directly, and get a small development platform with keypad input and Graphic LCD display. Learn More
  3. LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a rotary encoder. It is fully compatible with the Arduino UNO board. You can achieve the desired display function only by connecting it with the Arduino UNO board, and then programming the corresponding code . In addition, we extended a five-way key and a rotary encoder, and (D13-D11) Digital IO, (A0-A5) Analog IO containing SPI, I2C interface, so you can achieve key function on LCD1602 screen and encoder function, and you can also assemble the electronic bricks and many other modules with our LCD Key Shield, therefore, you can display the results you need on the LCD.

    This item would be removed off after selling out.

    Learn More
  4. Freaduino Sensor Shield is a IO expansion board. It is full compatible with Sensor Shield V4.0 and it is a enhancement version. You can control servo or all kinds of sensors through XBee or our BTBee(HC-06). And external power supply for servo allowed you to drive more powerful servos, and it is optional between 5V on board and external power supply connector.Break out for SPI,IIC and UART bus make bus connect easier. 

    Learn More
  5. This board have updated to Rev2.0 with white color, its more stable and the same to use it The TFT01 LCD module works in 3.3V voltage level and it's not compatible with Arduino MEGA pins , so we make a shield for Arduino MEGA. Now users can directly plug the TFT01 in the shield and stand on the Arduino MEGA board. The TFT01 MEGA shield V1.0 supports both 16 bit mode. Because of Mega boards have enough pins for using SD card and Touch function at the same time. Learn More
  6. This board have updated to Rev2.0 with white color. it canceled the 16bit mode and IRQ support. The CS connect to GND. So the code need to be modified. we have updated to Demo code.

    The TFT01 LCD module  works in 3.3V voltage level and it's not compatible with Arduino pins , so we make a shield for Arduino. Now users can directly plug the TFT01 in the shield and stand on the Arduino board.

    The TFT01 shield supports 8 bit mode and you can use 2.4" with it . If you use the 8 bit mode , you can use the SD card or Touch in the TFT01 either .

    This item would be removed off after selling out.

    Learn More
  7. RFID/NFC Shield is a Near Field Communication interface for Arduino to build around the popular NXP PN532 integrated circuit and SPI communication between Arduino and NFC Shield.. RFID/NFC is a short-distance radio technology that enables communication between devices that are held close together. RFID/NFC traces its roots in RFID technology and is an open platform technology standardized in ECMA-340 and ISO/IEC 18092.

    This item would be removed off after selling out.

    Learn More
  8. Bluetooth Shield, a serial port Bluetooth module (Master/Slave) breakout board. You can choose ARDUINO's Digital PIN D0->D7 as Software UART to communicate with Bluetooth Shield(and D0,D1 also is Hardware UART). Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR(Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). Hope it will simplify your overall design/development cycle. And now, we provide HC-05, which could be set to Master or Slave by user.

    This item would be removed off after selling out.

    Learn More
  9. Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects.

    Learn More
  10. Arduino advanced kit provided by ELECFREAKS is based on our starter kit to expand more and more popular modules owing the characteristics of plug and use without any requirement of soldering. We have well prepared six courses for learners to learn the usage of modules in an intersting environment which is better for stimulating your thinking mind. For example,Tetris games help us to study the usage of the LCD screen and Arduino program. Color picker used can help us to learn the color sensor as well as BLE Bluetooth communication and Android interface development ... Practical Course included LCD screen, sensor, MP3, BLE, WIFI, Android development, and image interaction (processing), make you open-minded! Learn More

Grid  List 

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3