cart
item - $0.00

You have no items in your shopping cart.

Subtotal
$0.00

Wireless

Grid  List 

Set Ascending Direction
  1. Special Price $19.99

    Regular Price: $39.98

    The CC3000 module is a self-contained wireless network processor that simplifies the implementation of Internet connectivity using simple Link Wi-Fi technology. CC3000's Simple Link Wi-Fi solution minimized the software requirements of the host microcontroller (MCU) and is thus an ideal solution for embedded applications using any low-cost and low-power MCU. Learn More
  2. 4 Frequency GPRS/GSM Module-EFCom Pro is an ultra compact and reliable wireless module. It is a breakout board and minimum system of SIM900 Quad-band GSM/GPRS module. It can communicate with controllers via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). This module support software power on and reset. 
    EFCom Pro is base on SIM900 4 Frequency GPRS module

    The GPRS is configured and controlled via its UART using simple AT commands. Just connect on the Arduino/AVR/ARM/FPGA/CPLD board, you could easily use AT command to control it. EFCom Por can be connected to PC via FT233RL, recommend our FT232 Bee adapter 

    Learn More
  3. The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!

    Learn More
  4. The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insolation coil, it could serve as a replacement for the Wireless Power Supply with stable 9V output voltage and maximum 600mA output current. Its small size and insolation coil are more suitable for using in wireless project. Learn More
  5. This module only different to nRF24L01 is added a 250Kbps data rate, which uses the newest 2.4GHz transceiver from Nordic Semiconductor nRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401P and add some extra pipelines, buffers, and an auto-retransmit feature.

     

    Learn More
  6. Bluetooth Bee is an easy to use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup. It can be configured to Master, Slave or Loopback three different modes(HC-06 just be Master/Slave, coulud be customized), and it will connect to or be connected by other devices that support SPP protocol per configuration, and it is a suitable substitute for most applications. Bluetooth Bee is designed for transparent wireless serial connection setup. This is a fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps modulation with complete 2.4GHz radio transceiver. It uses CSR Bluecore4-external single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping). Learn More
  7. Bluetooth Bee is an easy- to- use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup. It can be configured to Master, Slave or Loopback three different modes(HC-06 just be Slave), and it will connect to or be connected by other devices that support SPP protocol per configuration, and it is a suitable substitute for most applications. Learn More
  8. ESP Wifi Module with low power consumption, low price, built-in TCP / IP protocol, a temperature sensor, low-power 32 CPU (still used as applications processor), supports antenna diversity and SDIO2.0, SPI, UART interfaces, etc…It can be used in smart home, industrial wireless control, mesh networks, sensor networks, network cameras, wearable electronic devices, wireless position sensing devices, safe ID tags and other fields.

    This item would be removed off after selling out.

    Learn More
  9. You can use it with Freaduino(work on 3.3V mode) and other MCU. Using with our APP,you can easily control robot ,drone and others by BLE. Adopting TI CC2540 chip with 256 KB space, the BLE HC module can use BLE technology through the simple IO control, between the module and mobile, also between the module and module. The BLE module has both Master and Slave Mode, with the command control, through the serial port capable of switching module master-slave role, capable of configuring the serial port baud rate, capable of modifying the module radio name, capable of modifying the broadcast interval and the connection interval. Using this module, users can quickly transmit data in the form of Bluetooth packet.

    This item would be removed off after selling out.

    Learn More

Grid  List 

Set Ascending Direction