cart
item - $0.00

You have no items in your shopping cart.

Subtotal
$0.00

Octopus Analog UV sensor (GUVA-S12SD)

More Views

Octopus Analog UV sensor (GUVA-S12SD)


SKU: EF04093

weight:36g

Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the same.

Availability: In stock

$5.50
  • Add to Wish List
  • Details

    Introduction


    Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the same.

    It can measure the total UV intensity of the sunlight; linear signal voltage output; and it can be used as UV dosimeters, UV index instrument and flame detection,etc,.

    Characteristics

    • Design for the occasions need reliable and concise UV index.

    • Support micro:bit in 3V.

    • Easy and convenient for connection.


    Parameter

    • Name: Octopus Analog UV sensor (GUVA-S12SD)

    • SKU:EF04093

    • Working Voltage: DC 3~5.5V

    • Connection Mode: G-GND,V-VCC,S-signal pin

    • Test Precision: ±1 UV INDEX

    • Wave length: 200nm-370nm

    • Response Time: Below 0.5 second

    • Size: 38.9x23.5mm

    • Net Weight: 5g


    Dimensions and Outlook


     

    Quick to Start


    Hardware Connection

    Connect the module with the wire(with buckle) to the PI pins on the Octopus:bit, insert the micro:bit to the Octopus:bit.

    Software Programming

    Programme in the makecode and analog read P1 to get the intensity of the UV that would be displayed on the micro:bit. Links: https://makecode.microbit.org/_4urWJCMeuh4L

    You can also download it directly:

    Result

    The UV intensity is showing on the micro:bit.

    FAQ

     

     

     

    comments powered by Disqus