cart
item - $0.00

You have no items in your shopping cart.

Subtotal
$0.00

Sensor

Grid  List 

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. The analog gas sensor - MQ2 is used in gas leakage detecting equipments in consumer and industry markets, this sensor is suitable for detecting LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It has a high sensitivity and fast response time.And the sensitivity can be adjusted by the potentiometer.

    This item would be removed off after selling out.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  2. The analog gas sensor - MQ2 is used in gas leakage detecting equipments in consumer and industry markets, this sensor is suitable for detecting LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It has a high sensitivity and fast response time.And the sensitivity can be adjusted by the potentiometer.

    This item would be removed off after selling out.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  3. This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. You even could use it as a touch panel.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  4. 9 DOF sensor module is a triple version for ITG3205 triaxial gyroscope + QMC5883L triaxial magnetic field + ADXL345 triaxial acceleration. These three sensors can be used for measuring angles,the magnetic field direction,tilt, acceleration respectively,and now we can combine them on one board, so that we can achieve three sensor functional tests on one board. And our module requires only a simple 4-wire I2C interface connected with Arduino UNO, which can achieve functional tests, very simply and conveniently.

    This item would be removed off after selling out.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  5. 3-Axis Digital Compass Sensor is a sensor module based on QMC5883L three-axis digital compass IC.The QMC5883L is a multi-chip three-axis magnetic sensor. This surface -mount, small sized chip has integrated magnetic sensors with signal condition ASIC, targeted for high precision applications such as compassing, navigation and gaming in drone, robot, mobile and personal hand-held devices. The QMC5883L is based on our state-of-the-art, high resolution, magneto-resistive technology licensed from Honeywell AMR technology.Along with custom-designed 16-bit ADC ASIC, it offers the advantages of low noise, high accuracy, low power consumption, offset cancellation and temperature compensation. QMC5883L enables 1° to 2° compass heading accuracy. The I²C serial bus allows for easy interface.

    This item would be removed off after selling out.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  6. MAX6675 is a 12-bit resolution Serial K-type thermocouple converter, produced by American company MAXIM, with merits of cold junction compensation, linearity correction, thermocouple break detection and so on. Based on the principle of the chip, our module is available to measure temperature, using the three-wire SPI communication, plus a K-type thermocouple probe connected to Arduino mainboard. Measurement results can be displayed in Arduino IDE. (We are using IIC / SPI_LCD module to display the measurement results) Module can be used in room temperature measurement, also refrigerator, power room, textile machinery, air conditioners and other small space industrial equipment temperature measurement .

    This item would be removed off after selling out.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  7. Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a must have tool for a connected garden! This sensor uses the two probes to pass current through the soil, and then it reads that resistance to get the moisture level. More water makes the soil conduct electricity more easily (less resistance), while dry soil conducts electricity poorly (more resistance). It will be helpful to remind you to water your indoor plants or to monitor the soil moisture in your garden.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  8. Vibration Sensor Brick is a module based on vibration trigger switch. When in the stationary state, the indicator LED is OFF. When subjected to external vibration touch to achieve the appropriate vibration force, or move away from the speed of the appropriate (partial) effort, conductive pin will produce an instant turn-on (ON) state. At that time, electrical characteristics have changed. While if the external force disappear, electrical characteristics will restore OFF state. Through Arduino board D13 port indicator LED on/ off, you can clearly see how the vibration sensor works. This module can be used in vibration testing, reporting theft alarm, smart car and so on.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  9. Octopus Analog Rotation Brick is arduino compatible and can be rotated up to 300-degree. It is based on the potentiometer. With the Arduino IO expansion board, in combination, it can be very easy to achieve position-dependent interaction with the rotating effect or produce MIDI instrument.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More
  10. OCTOPUS Real-time Clock is a clock module which can achieve counting for year, month, day, hour by using the DS1307 clock chip.This chip has lots of merits, low power supply, with 56 bytes of non-volatile RAM clock calendar full BCD code real-time clock chip, the address and data via a two-wire bidirectional serial bus transmission, providing seconds, minutes, hours and other information , automatically adjusting the number of days in each month. And more surprisingly, the chip also equip with the function of leap year compensation. Chip has a built-in power-sense circuit, brownout detection, and battery switching function.

    This item would be removed off after selling out.

    News: All of Octopus bricks has supported Scratch programming. ElecFreaks builded EFBlock support drag and drop programming . Guide please check here

    Learn More

Grid  List 

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5