You have no items in your shopping cart.
Details
Introduction
EL driver module is used for driving the EL or EL panel in the market, the EL is also called the cold light neon tube which is apyretic and water-proof that can also be wound to any shape. Multiple colors like red, green, blue, yellow, purple, orange, transparent, pink, bisque and white can be found in the market. EL (electroluminescence) is a physical phenomenon in which an electric field is generated by a power source applied to two electrodes, and an electron excited by an electric field strikes an illuminating center, causing a transition of an electron level, a change or a combination that causes the luminescence, that is, an electroluminescence phenomenon.
Characteristics
-
Easy installment with 3-pin connectors.
-
Supporting micro:bit in 3V.
-
Easy to connect wires.
Specification
Outlook and Dimensions
Quick to Start
Required Parts and Connection Diagram
-
Connect to P1 port of the breakout board.
Take sensor:bit for an example
Pogramme as the Picture Shows
Press button A to light on and button B to light off.
Reference
Links: https://makecode.microbit.org/_fRzWh9M1jDKP
You can also download it directly below:
Result
Press button A to light on and button B to light off the EL.
Noticeļ¼ the Neon EL Wire is required to be used with the EL Driver Module. And you need to buy them seperately
Please visit the link for purchasingļ¼
Neon Light EL Wire 1000mmx2.3mm Green
Neon Light EL Wire 1000mmx2.3mm White
Neon Light EL Wire 1000mmx2.3mm Yellow
Neon Light EL Wire 1000mmx2.3mm Purple
Neon Light EL Wire 1000mmx2.3mm Blue
Neon Light EL Wire 1000mmx2.3mm Red
Neon Light EL wire 1000mmx2.3mm Orange
Packing list
-
1 x Octopus EL Drive Module