Neopixel Rainbow LED strip and GVS conector -10 LEDs
This is a colorful strip based on WS2812B beads, it can display the color of RGB and support multiple cascade at the same time.
Standard 3-pin GVS ports is easy to plug.
Both ends are equipped with a connector and it supports multiple cascade.
It can drive the micro:bit in 3.3V.
|Working Voltage||DC 3.0V|
|Number of beads||10 pcs|
|Pins Definition||1-Signal 2-VCC 3-GND|
|Response||Quick to response and high sensitivity|
|Circuit||Simple drive circuit|
|Stability||Stable and durable|
Outlook and Dimensions
Quick to Start
Connect to the P1 port of the extension board.
Click "Advanced" in MakeCode to check more choices.
Click "Extensions", and search "neopixel" in the dialogue box to download the codebase of LED beads.
Programme as the Picture Shows
Links: https://makecode.microbit.org/_bfECLKegkYbR You can also download the links below:
The LED strips display in a light water way.