Octopus EL Driver Module
EL driver module is used for driving the EL or EL panel in the market, the EL is also called the cold light neon tube which is apyretic and water-proof that can also be wound to any shape. Multiple colors like red, green, blue, yellow, purple, orange, transparent, pink, bisque and white can be found in the market. EL (electroluminescence) is a physical phenomenon in which an electric field is generated by a power source applied to two electrodes, and an electron excited by an electric field strikes an illuminating center, causing a transition of an electron level, a change or a combination that causes the luminescence, that is, an electroluminescence phenomenon.
Easy installment with 3-pin connectors.
Supporting micro:bit in 3V.
Easy to connect wires.
|Name||Octopus EL Driver Module|
|Size||73 X 13 X 10mm|
|Pins Definition||1-Signal 2-VCC 3-GND|
|Responset||Quick response with high sensitivity|
|Circuit||Simple drive circuit|
|Stability||Stable and durable|
Quick to Start
Required Parts and Connection Diagram
Connect to P1 port of the breakout board.
Take sensor:bit for an example
Pogramme as the Picture Shows
Press button A to light on and button B to light off.
You can also download it directly below:
Press button A to light on and button B to light off the EL.
the Neon EL Wire is required to be used with the EL Driver Module. And you need to buy them seperately
Please visit the link for purchasing:
|Octopus EL Drive Module||1|