Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit
Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need any external calibration. When it is at +25°C, its typical accuracy is ±1°C,while it is within the range from -40°C to +125°C, its typical accuracy is ±2°C.
Accuracy：±2°C（Typical value in the whole temperature range）
Enable to drive big capacitive load stably.
Low Working Voltage：+2.7 V to +5.5 V
When power currency lower than 50 μA, it has very small automatic heat effect.
No need to do any external calibration.
Nominated Temperature Measuring Range：-40 °C to +125 °C, working temperature can be up to +150 °C.
Ratio Coefficient：+10 mV/°C
Static Current：lower than 50 μA
Turn Off Current：Maximum 0.5 μA
|Octopus TMP36 Temperature Sensor Brick||1|
|Analog Sensor Cable||1|