TFT01 LCD Drive Controller Initialization

TFT01 LCD Drive Controller Initialization

TFT01 series LCD modules there are 3 kind of sizes. They are 2.4"(RGB 320 x 240), 3.2"(RGB 320 x 240)and 3.2w"(RGB 400 x 240). Each of it has separate drive controller.  We conclude that each of the drive, for user-friendly reference. 2.4"(RGB 320 x 240), used a controller ILI9325, it’s a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. Note the Address_set() function is different each other, which setting X/Y coordinates. The initial function as follows:

[cce_cpp]
void Address_set(unsigned int x1,unsigned int y1,unsigned int x2,unsigned int y2)
{
      Lcd_Write_Com(0x00,0x20);
      Lcd_Write_Data(x1>>8,x1);	  //Setting X
      Lcd_Write_Com(0x00,0x21);
      Lcd_Write_Data(y1>>8,y1);   //Setting Y
      Lcd_Write_Com(0x00,0x50);
      Lcd_Write_Data(x1>>8,x1);   //start X
      Lcd_Write_Com(0x00,0x52);
      Lcd_Write_Data(y1>>8,y1);	  //start Y
      Lcd_Write_Com(0x00,0x51);
      Lcd_Write_Data(x2>>8,x2);   //end X
      Lcd_Write_Com(0x00,0x53);
      Lcd_Write_Data(y2>>8,y2);   //end Y
      Lcd_Write_Com(0x00,0x22);
}

void Lcd_Init(void)
{
       digitalWrite(LCD_REST,HIGH);
       delay(5);
       digitalWrite(LCD_REST,LOW);
       delay(15);
       digitalWrite(LCD_REST,HIGH);
       delay(15);

        digitalWrite(LCD_CS,LOW);
        Lcd_Write_Com_Data(0x0001, 0x0100); // set SS and SM bit
	Lcd_Write_Com_Data(0x0002, 0x0200); // set 1 line inversion
	Lcd_Write_Com_Data(0x0003, 0x1030); // set GRAM write direction and BGR=1.
	Lcd_Write_Com_Data(0x0004, 0x0000); // Resize register
	Lcd_Write_Com_Data(0x0008, 0x0207); // set the back porch and front porch
	Lcd_Write_Com_Data(0x0009, 0x0000); // set non-display area refresh cycle ISC[3:0]
	Lcd_Write_Com_Data(0x000A, 0x0000); // FMARK function
	Lcd_Write_Com_Data(0x000C, 0x0000); // RGB interface setting
	Lcd_Write_Com_Data(0x000D, 0x0000); // Frame marker Position
	Lcd_Write_Com_Data(0x000F, 0x0000); // RGB interface polarity
	//*************Power On sequence ****************//
	Lcd_Write_Com_Data(0x0010, 0x0000); // SAP, BT[3:0], AP, DSTB, SLP, STB
	Lcd_Write_Com_Data(0x0011, 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
	Lcd_Write_Com_Data(0x0012, 0x0000); // VREG1OUT voltage
	Lcd_Write_Com_Data(0x0013, 0x0000); // VDV[4:0] for VCOM amplitude
	Lcd_Write_Com_Data(0x0007, 0x0001);
	delay(200); // Dis-charge capacitor power voltage
	Lcd_Write_Com_Data(0x0010, 0x1690); // SAP, BT[3:0], AP, DSTB, SLP, STB
	Lcd_Write_Com_Data(0x0011, 0x0227); // Set DC1[2:0], DC0[2:0], VC[2:0]
	delay(50); // Delay 50ms
	Lcd_Write_Com_Data(0x0012, 0x000D); // 0012
	delay(50); // Delay 50ms
	Lcd_Write_Com_Data(0x0013, 0x1200); // VDV[4:0] for VCOM amplitude
	Lcd_Write_Com_Data(0x0029, 0x000A); // 04  VCM[5:0] for VCOMH
	Lcd_Write_Com_Data(0x002B, 0x000D); // Set Frame Rate
	delay(50); // Delay 50ms
	Lcd_Write_Com_Data(0x0020, 0x0000); // GRAM horizontal Address
	Lcd_Write_Com_Data(0x0021, 0x0000); // GRAM Vertical Address
	// ----------- Adjust the Gamma Curve ----------//
	Lcd_Write_Com_Data(0x0030, 0x0000);
	Lcd_Write_Com_Data(0x0031, 0x0404);
	Lcd_Write_Com_Data(0x0032, 0x0003);
	Lcd_Write_Com_Data(0x0035, 0x0405);
	Lcd_Write_Com_Data(0x0036, 0x0808);
	Lcd_Write_Com_Data(0x0037, 0x0407);
	Lcd_Write_Com_Data(0x0038, 0x0303);
	Lcd_Write_Com_Data(0x0039, 0x0707);
	Lcd_Write_Com_Data(0x003C, 0x0504);
	Lcd_Write_Com_Data(0x003D, 0x0808);
	//------------------ Set GRAM area ---------------//
	Lcd_Write_Com_Data(0x0050, 0x0000); // Horizontal GRAM Start Address
	Lcd_Write_Com_Data(0x0051, 0x00EF); // Horizontal GRAM End Address
	Lcd_Write_Com_Data(0x0052, 0x0000); // Vertical GRAM Start Address
	Lcd_Write_Com_Data(0x0053, 0x013F); // Vertical GRAM Start Address
	Lcd_Write_Com_Data(0x0060, 0xA700); // Gate Scan Line
	Lcd_Write_Com_Data(0x0061, 0x0001); // NDL,VLE, REV

	Lcd_Write_Com_Data(0x006A, 0x0000); // set scrolling line
	//-------------- Partial Display Control ---------//
	Lcd_Write_Com_Data(0x0080, 0x0000);
	Lcd_Write_Com_Data(0x0081, 0x0000);
	Lcd_Write_Com_Data(0x0082, 0x0000);
	Lcd_Write_Com_Data(0x0083, 0x0000);
	Lcd_Write_Com_Data(0x0084, 0x0000);
	Lcd_Write_Com_Data(0x0085, 0x0000);
	//-------------- Panel Control -------------------//
	Lcd_Write_Com_Data(0x0090, 0x0010);
	Lcd_Write_Com_Data(0x0092, 0x0000);
	Lcd_Write_Com_Data(0x0007, 0x0133); // 262K color and display ON
        digitalWrite(LCD_CS,HIGH);

}
[/cce_cpp]

    3.2"RGB 320 x 240),   a controller SSD1289, it’s a support 16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051.  Note the Address_set() function is different each other, which setting X/Y coordinates. The initial function as follows:

[cce_cpp]
void Address_set(unsigned int x1,unsigned int y1,unsigned int x2,unsigned int y2)
{
      Lcd_Write_Com_Data(0x0044,(x2<<8)+x1);
      Lcd_Write_Com_Data(0x0045,y1);
      Lcd_Write_Com_Data(0x0046,y2);
      Lcd_Write_Com_Data(0x004e,x1);
      Lcd_Write_Com_Data(0x004f,y1);
      Lcd_Write_Com(0x00,0x22);
}

void Lcd_Init(void)
{
       digitalWrite(LCD_REST,HIGH);
       delay(5);
       digitalWrite(LCD_REST,LOW);
       delay(15);
       digitalWrite(LCD_REST,HIGH);
       delay(15);

    Lcd_Write_Com_Data(0x0000,0x0001);    delay(1);  //Open Crystal
    Lcd_Write_Com_Data(0x0003,0xA8A4);    delay(1);   //0xA8A4
    Lcd_Write_Com_Data(0x000C,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x000D,0x080C);    delay(1);
    Lcd_Write_Com_Data(0x000E,0x2B00);    delay(1);
    Lcd_Write_Com_Data(0x001E,0x00B7);    delay(1);
    Lcd_Write_Com_Data(0x0001,0x2B3F);    delay(1);   //320*240  0x6B3F
    Lcd_Write_Com_Data(0x0002,0x0600);    delay(1);
    Lcd_Write_Com_Data(0x0010,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0011,0x6070);    delay(1);        //0x4030
    Lcd_Write_Com_Data(0x0005,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0006,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0016,0xEF1C);    delay(1);
    Lcd_Write_Com_Data(0x0017,0x0003);    delay(1);
    Lcd_Write_Com_Data(0x0007,0x0233);    delay(1);        //0x0233
    Lcd_Write_Com_Data(0x000B,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x000F,0x0000);    delay(1);        //start address
    Lcd_Write_Com_Data(0x0041,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0042,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0048,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0049,0x013F);    delay(1);
    Lcd_Write_Com_Data(0x004A,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x004B,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0044,0xEF00);    delay(1);
    Lcd_Write_Com_Data(0x0045,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0046,0x013F);    delay(1);
    Lcd_Write_Com_Data(0x0030,0x0707);    delay(1);
    Lcd_Write_Com_Data(0x0031,0x0204);    delay(1);
    Lcd_Write_Com_Data(0x0032,0x0204);    delay(1);
    Lcd_Write_Com_Data(0x0033,0x0502);    delay(1);
    Lcd_Write_Com_Data(0x0034,0x0507);    delay(1);
    Lcd_Write_Com_Data(0x0035,0x0204);    delay(1);
    Lcd_Write_Com_Data(0x0036,0x0204);    delay(1);
    Lcd_Write_Com_Data(0x0037,0x0502);    delay(1);
    Lcd_Write_Com_Data(0x003A,0x0302);    delay(1);
    Lcd_Write_Com_Data(0x003B,0x0302);    delay(1);
    Lcd_Write_Com_Data(0x0023,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0024,0x0000);    delay(1);
    Lcd_Write_Com_Data(0x0025,0x8000);    delay(1);
    Lcd_Write_Com_Data(0x004f,0);        //
    Lcd_Write_Com_Data(0x004e,0);        //
    Lcd_Write_Com(0x00,0x22);	

}
[/cce_cpp]

      3.2w"RGB 400 x 240),   a controller ILI9327, it’s a support 16bit data interface. The initial function as follows:

[cce_cpp]
void Address_set(unsigned int x1,unsigned int y1,unsigned int x2,unsigned int y2)
{
        Lcd_Write_Com(0x00,0x2a);
  	Lcd_Write_Data(0x00,x1>>8);	    //start X
  	Lcd_Write_Data(0x00,x1);	    //start X
  	Lcd_Write_Data(0x00,x2>>8);	    //end X
  	Lcd_Write_Data(0x00,x2);	    //end X
  	Lcd_Write_Com(0x00,0x2b);
  	Lcd_Write_Data(0x00,y1>>8);	    //start Y
  	Lcd_Write_Data(0x00,y1);	    //start Y
  	Lcd_Write_Data(0x00,y2>>8);	    //end Y
  	Lcd_Write_Data(0x00,y2);	    //end Y
  	Lcd_Write_Com(0x00,0x2c);
}

void Lcd_Init(void)
{
       digitalWrite(LCD_REST,HIGH);
       delay(5);
       digitalWrite(LCD_REST,LOW);
       delay(15);
       digitalWrite(LCD_REST,HIGH);
       delay(15);

    digitalWrite(LCD_CS,LOW);

        Lcd_Write_Com(0x00,0xE9);
	Lcd_Write_Data(0x00,0x20);
	Lcd_Write_Com(0x00,0x11); //Exit Sleep
	delay(100);
	Lcd_Write_Com(0x00,0xD1);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0x71);
	Lcd_Write_Data(0x00,0x19);
	Lcd_Write_Com(0x00,0xD0);
	Lcd_Write_Data(0x00,0x07);
	Lcd_Write_Data(0x00,0x01);
	Lcd_Write_Data(0x00,0x08);
	Lcd_Write_Com(0x00,0x36);
	Lcd_Write_Data(0x00,0x48);
	Lcd_Write_Com(0x00,0x3A);
	Lcd_Write_Data(0x00,0x05);
	Lcd_Write_Com(0x00,0xC1);
	Lcd_Write_Data(0x00,0x10);
	Lcd_Write_Data(0x00,0x10);
	Lcd_Write_Data(0x00,0x02);
	Lcd_Write_Data(0x00,0x02);
	Lcd_Write_Com(0x00,0xC0); //Set Default Gamma
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0x35);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0x01);
	Lcd_Write_Data(0x00,0x02);
	Lcd_Write_Com(0x00,0xC5); //Set frame rate
	Lcd_Write_Data(0x00,0x04);
	Lcd_Write_Com(0x00,0xD2); //power setting
	Lcd_Write_Data(0x00,0x01);
	Lcd_Write_Data(0x00,0x44);
	Lcd_Write_Com(0x00,0xC8); //Set Gamma
	Lcd_Write_Data(0x00,0x04);
	Lcd_Write_Data(0x00,0x67);
	Lcd_Write_Data(0x00,0x35);
	Lcd_Write_Data(0x00,0x04);
	Lcd_Write_Data(0x00,0x08);
	Lcd_Write_Data(0x00,0x06);
	Lcd_Write_Data(0x00,0x24);
	Lcd_Write_Data(0x00,0x01);
	Lcd_Write_Data(0x00,0x37);
	Lcd_Write_Data(0x00,0x40);
	Lcd_Write_Data(0x00,0x03);
	Lcd_Write_Data(0x00,0x10);
	Lcd_Write_Data(0x00,0x08);
	Lcd_Write_Data(0x00,0x80);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Com(0x00,0x2A);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0xeF);
	Lcd_Write_Com(0x00,0x2B);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0x00);
	Lcd_Write_Data(0x00,0x01);
	Lcd_Write_Data(0x00,0x8F);
	Lcd_Write_Com(0x00,0x29); //display on
	Lcd_Write_Com(0x00,0x2C); //display on

    digitalWrite(LCD_CS,HIGH);

}
[/cce_cpp]