Octopus Button Switch Brick OBButton

This item would be removed off after selling out.

In stock
SKU
EF04033
$1.99
Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection are prepared to extensive modules like poteniometers, sensors, relays, servos even buttons, just plug and play. 

This is a Button Switch with Circle Transparent Cap, which detects your press action. It is ideal for beginner class to test the Arduino or be your first sensor in your project. It was easy to be used for Chipkit, STM32, AVR, ARM and other mirc-MCU.

The Freaduino Sensor Shield is the perfect shield to connect this senor to Arduino. Or Freaduino UNO which we had pre-stray Octopus Brick interface.

You can add the label under the Circle Transparent Cap.

Features
  • 3P buckled wires connector
  • Easy to plug and play
  • Large button keypad and high-quality first-class hat
  • Able to achieve very interesting and an interactive work

Specification
  • Big button module pin definition: (1) Output (2) VCC (3) GND

Shipping List

  • 1 x Button switch With Circle Transparent Cap
  • 1 x Analog Sensor Cable

 

Quick Start

Hardware Connection

Connection note: Connect this module to the P1 port on OCTOPUS:BIT, and insert the micro:bit into the OCTOPUS:BIT. 

Programming

Code

Program links:https://makecode.microbit.org/_3mjDMT4W3iDk You can also download it directly from below:

 

Results

When pressing the switch, a "square" pattern can be seen on the 5x5 led screen, or a "icon" pattern shows on the screen without being pressed.

Resources:

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. 

Write Your Own Review
You're reviewing:Octopus Button Switch Brick OBButton

No Related Posts