Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit

In stock
SKU
EF04079
$2.90

Introduction:

Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need any external calibration. When it is at +25°C, its typical accuracy is ±1°C,while it is within the range from -40°C to +125°C, its typical accuracy is ±2°C.

Features:

  • Accuracy:±2°C(Typical value in the whole temperature range)

  • Linear Degree:±0.5°C(Typical)

  • Enable to drive big capacitive load stably.

  • Low Working Voltage:+2.7 V to +5.5 V

  • When power currency lower than 50 μA, it has very small automatic heat effect.

  • No need to do any external calibration.

  • Nominated Temperature Measuring Range:-40 °C to +125 °C, working temperature can be up to +150 °C.

  • Ratio Coefficient:+10 mV/°C

  • Analog Output

  • Static Current:lower than 50 μA

  • Turn Off Current:Maximum 0.5 μA

 

Shipping List:

  • 1 x Octopus TMP36 Temperature Sensor Brick

  • 1 x Analog Sensor Cable

Write Your Own Review
You're reviewing:Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit

No Related Posts