ELECFREAKS Octopus 3V Laser Sensor
January 9, 2020ELECFREAKS micro:bit Wukong Expansion Board Adapter
January 9, 2020ELECFREAKS Octopus Analog UV Sensor (GUVA-S12SD)
$5.50
ELECFREAKS Octopus Analog UV Sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks, and the setting of its outlook, the PCB fixing hole, and the connectors are the same.It can measure the total UV intensity of the sunlight; linear signal voltage output; and it can be used as UV dosimeters, UV index instruments, and flame detection, etc,
818 in stock
DESCRIPTION
ELECFREAKS Octopus Analog UV Sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks, and the setting of its outlook, the PCB fixing hole, and the connectors are the same.
It can measure the total UV intensity of the sunlight; linear signal voltage output; and it can be used as UV dosimeters, UV index instruments, and flame detection, etc,
CHARACTERISTICS
Design for the occasions needs a reliable and concise UV index.
Support micro:bit in 3V.
Easy and convenient for connection.
SPECIFICATION
Items | Parameters |
---|---|
Name | Octopus Analog UV sensor (GUVA-S12SD) |
SKU | EF04093 |
Working Voltage | DC 3~5.5V |
Connection Mode | G-GND, V-VCC, S-signal pin |
Test Precision | ±1 UV INDEX |
Wavelength | 200nm-370nm |
Response Time | Below 0.5 second |
Size | 38.9×23.5mm |
Net weight | 5g |
CONNECTION DIAGRAM
Connect the module with the wire(with buckle) to the PI pins on the Octopus:bit, and insert the micro:bit to the Octopus:bit.
PROGRAMMING
Program in the makecode and analog read P1 to get the intensity of the UV that would be displayed on the micro:bit. Links
You can also download it directly:
RESULTS
The UV intensity is showing on the micro:bit.
Weight | 0.04 kg |
---|
Reviews
There are no reviews yet.