ELECFREAKS micro:bit Edge:bit
January 8, 2020ELECFREAKS Octopus Analog Rotation Brick-Blue
January 9, 2020ELECFREAKS Sensor:bit (IO Extension Board For micro:bit)
$7.99
Sensor:bit is a micro bit expansion board. It has extended all available IO ports on micro:bit, and led out them in the form of GVS. With this micro bit expansion board, we can extend various 3V electric brick modules like LED light, photocell, etc. On the micro bit expansion board, it has integrated a buzzer and an audio jack, which allows us to hear music from the buzzer or with our headphones.
669 in stock
DESCRIPTION
Sensor:bit is a micro bit expansion board. It has extended all available IO ports on micro:bit, and led out them in the form of GVS. With this micro bit expansion board, we can extend various 3V electric brick modules like LED light, photocell, etc. On the micro bit expansion board, it has integrated a buzzer and an audio jack, which allows us to hear music from the buzzer or with our headphones.
FEATURES
Extend most IO ports on micro:bit by GVS pins.
Independently lead out IIC interface. Enable to plug in IIC components like OLED, BME280, etc..
Integrated a buzzer and an audio jack.
Support interface.
Mark out each IO port with silk printing.
DIMENSION
DISPLAY
DEFINITION OF PINS
INTRODUCTION OF MAJOR COMPONENTS
Audio Jack
The headphone is controlled by the P0 port. Plug in your headphone, and the buzzer will disconnect automatically.
Buzzer
The buzzer is controlled by the P0 port. Plug in your headphone, and the buzzer will disconnect automatically.
16 Channel Standard GVS Port
This is a standard GVS interface with 16 channels. It can extend a 3V electric brick module.
I2C Port
This is a group of I2C female headers, which can connect with the OLED module directly.
This is a group of I2C male headers.
HARDWARE ASSEMBLY
Plug your micro:bit into sensor:bit.
PROGRAMMING
Navigate to the programming interface of Makecode online editor. Write your code to make the buzzer on sensor:bit plays music.
You can see the whole program from the link
Or you can download it from the page below:
RESULT
Press button A on micro:bit, the buzzer starts to play music. Plug in your headphone to sensor:bit, the buzzer stops playing music, and you can hear the music through your headphone.
SPECIFICATION
Product Name Sensor:bit
Version No. V1.6
SKU EF03415
Working Voltage 2.7~3.3V
Buzzer Support
Interface Support
Size 57mm x 42mm
Net weight 18g
PACKAGE LIST
Components | Qty(pcs) |
---|---|
sensor:bit | 1 |
RESOURCES
Weight | 0.03 kg |
---|
You may also like…
-
ELECFREAKS micro:bit Magic Wand Kit (Without micro:bit Board)
$30.00【TIPS 】Wiki Tutorial:https://elecfreaks.com/learn-en/microbitKit/Magic_wand_kit/index.html
-
ELECFREAKS micro:bit Smart Home Kit (Without micro:bit Board)
$55.90【About micro:bit Smart Kit】Elecfreaks micro:bit Smart Home Kit is a product about smart home projects based on micro:bit which is developed by ELECFREAKS. It is available for use when being plugged, acts to connect limitless creativity with different sensors!
【Components】For this micro:bit Smart Home Kit, we selected executed components commonly used at home as a temperature smart home sensor, sound smart home sensor, crash smart home sensor, servo, motor, rainbow LED, and more.
【Fun Case】You can use the micro:bit Smart Home Kit to build scenes like windowsill, wardrobe, and fish tank, create yourself a smart sweet home, and program to intelligently drive them using micro:bit. You can use it to create many different cases such as smart fans, voice-activated lights, auto windows, and more.
【Graphical Programming Languages】The micro:bit Smart Home Kit fits for graphical Makecode programming, kids can use easier-to-understand programming methods to achieve what they want. It better improves their interest in programming!
-
ELECFREAKS Octopus Rain/Steam Sensor
$1.99This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.
-
ELECFREAKS micro:bit Wukong Expansion Board Adapter
$26.90Small size: 58mm*40mm, similar in size to BBC micro:bit. It does not take up space and is more flexible.
Compatible with base: blocks can be built on it, and children can create interesting cases, which can better improve children’s creative ability.
Widely Used Breakout Board: There are 8 servo drivers connection, 2 motor drivers connection, 4 Rainbow LEDs, 8 LEDs, and a buzzer switch on board.
400mAh Li-ion Battery: 20 minutes for completing the charge that can operate for more than 40 minutes a time.
Working Voltage: 3.7v~5v, Most of the IO ports led out in GVS form. Standalone IIC pots are available for OLED and BME280.
-
ELECFREAKS Octopus Smoke Sensor MQ-2 Brick
$3.90The analog gas sensor – MQ2 is used in gas leakage detecting equipment in consumer and industry markets, this sensor is suitable for detecting LPG, i-butane, propane, methane, alcohol, Hydrogen, and smoke. It has high sensitivity and a fast response time. And the sensitivity can be adjusted by the potentiometer.
-
ELECFREAKS Octopus:bit (Breakout Board For micro:bit)
$12.90micro:bit breakout board is a kind of breakout board for micro:bit. It can lead out GPIO port, serial port, IIC port, and SPI port on the micro:bit board. The biggest feature of Octopus:bit is that it can switch electric levels for some GPIO ports, which makes micro:bit available to be adapted to 5V sensors.
-
ELECFREAKS Octopus 9DOF Module
$21.489 DOF sensor module is a triple version for ITG3205 triaxial gyroscope + HMC5883L triaxial magnetic field + ADXL345 triaxial acceleration. These three sensors can be used for measuring angles, the magnetic field direction, tilt, and acceleration respectively, and now we can combine them on one board so that we can achieve three sensor functional tests on one board. And our module requires only a simple 4-wire I2C interface connected with Arduino UNO, which can achieve functional tests, very simply and conveniently.
-
ELECFREAKS Octopus Analog Photocell Brick
$1.90Photocells are basically a resistor that changes their resistive value (in ohms Ω) depending on how much light is shining onto the squiggly face. They are very low cost, easy to get in many sizes and specifications, but are very inaccurate. Each photocell sensor will act a little differently than the other, even if they are from the same batch. The variations can be really large, 50% or higher! For this reason, they shouldn’t be used to try to determine precise light levels in lux or millicandela. Instead, you can expect to only be able to determine basic light changes
-
ELECFREAKS micro:bit Basic:bit (Three Ways I/O Expansion, Mini Version)
$3.90ELECFREAKS micro:bit Basic:bit is a basic microbit expansion board. It carries a buzzer and three groups of GVS pins(P0/P1/P2) on board. Each group of GVS pins separately leads out the IO port, 3V port, and GND port on micro:bit. Small size with a simple structure, it is quite enough for you to complete 98% micro:bit projects.
-
ELECFREAKS IOT:bit (Internet WIFI Extension Boards For micro:bit)
$16.90IoT:bit is an extension boards based on IoT micro bit online. Iot boards uses ESP8266 as a WIFI extension boards and serial port to communicate with micro:bit. It also has extended all available IO ports of the micro:bit which is led by GVS and you can extend various 3V E-blocks as LED, photosensitive, and servo by using it. At the same time, the IoT:bit with an on-board buzzer for outside sound and an on-board RTC clock for timing without a power supply. Let’s create your own IoT micro bit by makecode!
-
ELECFREAKS micro:bit Joystick:bit
$9.90ELECFREAKS micro:bit Joystick:bit is a game joystick based on micro:bit. On the board, it has integrated a joystick and 6 undefined keys. It is very convenient for users to extend different communication modules because it has extended connectors like GVS, IIC, SPI, and UART. Besides, it has a built-in power switch and outer power connector. It is very good to use.
-
ELECFREAKS Octopus Button Switch Brick
$1.99This is a Button Switch with Circle Transparent Cap, which detects your press action. It is ideal for beginner class to test the Arduino or be your first sensor in your project. It was easy to be used for Chip kit, STM32, AVR, ARM, and other mirc-MCU.
-
ELECFREAKS micro:bit Power:bit
$4.77ELECFREAKS Power:bit is a pocket-sized extension board. Power:bit is powered by two 2025 button batteries and carries a buzzer on the board. Due to its small cute size and abundant electric power, it is quite suitable to be applied to micro:bit wearable devices like pedometers, timers, portable music broadcasters, and so on.
-
ELECFREAKS micro:bit Motor:bit
$13.90Motor:bit is a motor driving board based on micro:bit. It has integrated a TB6612 motor driving chip, which is used to drive two motors with a maximum 1.2A DC single channel current. It has also integrated 12 GVS ports(for connecting the OCTOPUS series of electric bricks) and 1 IIC communication port. These ports allow you to extend with various sensors and electric modules. Besides, you can play music with the buzzer on the motor:bit. Motor:bit is totally designed for DIYers. You can use it to create your own smart car or more funny projects.
-
ELECFREAKS micro:bit Ring:bit V2
$6.90The micro:bit Ring:bit expansion board is a simple PCB for the micro:bit. The micro:bit Ring:bit extends the micro:bit’s 3 GPIO ports. We will use this module to convert the P0/P1/P2 port to the common GVS port. It can be loaded with 3 AAA batteries to drive the car or other components.
-
ELECFREAKS Octopus Digital PushButton Brick – Blue
$1.99This is a digital push button sensor, which detects your press action. It is ideal for beginner class to test the Arduino or be your first sensor in your project. It was easy to be used for Chipkit, STM32, AVR, ARM, and other mirc-MCU.
-
ELECFREAKS Octopus Passive Buzzer Sensor Brick
$2.50Octopus Passive Buzzer Sensor Brick is based on a passive buzzer sensor, it could control the volume by PWM. The distinction is active buzzer stickers.
-
ELECFREAKS Octopus DHT11 Temperature And Humidity Sensor
$5.98The DHT11 Temperature And Humidity Sensor is a module based on the DHT11 digital temperature and humidity sensing element. Simple design, and sensitivity to the ambient temperature and humidity changes. The DHT11 Temperature And Humidity Sensor can be used for temperature alarms, humidity testing, and other work.
Reviews
There are no reviews yet.