13. Case 05 - A Touch-controlled Dog

13.1. Purpose

Program to control the rotation of XGO through the touch logo on the micro:bit and the going backward and getting down through the sound level .

13.2. Materials Required

1 × micro:bit XGO Robot Kit

Note: A micro:bit V2.0 and above is required in this project.

13.3. Hardware Connections

Connect the micro:bit with the computer.

../../_images/microbit-xgo-robot-kit-22.png

13.4. Software Platform

Makecode

../../_images/microbit-xgo-robot-kit-10.png

13.5. Program

Add the XGO extensions.

../../_images/microbit-xgo-robot-kit-11.png

../../_images/microbit-xgo-robot-kit-12.png

../../_images/microbit-xgo-robot-kit-13.png

../../_images/microbit-xgo-robot-kit-14.png

13.6. Program

Code

../../_images/microbit-xgot-robot-kit-case01-out-of-the-square-05.png

Link: A Touch-controlled Dog

You can also download it directly below:

13.7. FAQ

If XGO doesn’t move, please try increasing the sound level.

13.8. Exploration

How to give more commands to XGO with different sound level ?