Case 24: The Top Emitter
26. Case 24: The Top Emitter#
Make a top emitter.
26.3. Materials Required#
26.4. Bricks build-up#
26.5. Hardware Connection#
Connect a motor to M1, and the servo to S1 ports on Wukong breakout board.
26.6. Software Platform#
Click “Advanced” in the MakeCode to see more choices.
Search with Wukong in the dialogue box to download it.
Place the gyro in the acceleration position, when the button A is pressed (long press) , the bottom baffle will support the small gyro on the baffle to accelerate the rotation; release the A button, the bottom baffle will move to the right, and the gyro falls off, then the motor will stop rotating.